ODM Factory Orifice Control Valve - DWMG10/16/22/25/32 SERIES MANUALLY OPERATED DIRECTIONAL VALVES – Hanshang Hydraulic

DWMG series manually operated directional valves are direct type directional valves ,It can control the start ,stop & direction of fluid flow. This series with detent or return spring are available.

Characteristic curves DWMG6

Characteristic curves DWMG10

Characteristic curves DWMG16

Characteristic curves 4DWMG25

DWMG6/10 Spool symbols

DWMG6 Subplate Installation Dimensions

DWMG10 Subplate Installation Dimensions

1.Valve’s set screw
4 of M6 ×50 GB/T70.1-12.9
Tightening torque Ma=15.5Nm.
2.O-ring φ16×1.9

DWMG16 Subplate Installation Dimensions

Valve’s set screw
4 of M10×60 GB/T70.1-12.9 Tightening torque Ma=75Nm.
2 of M6×60 GB/T70.1-12.9 Tightening torque Ma=15.5Nm.
O-ring for P.T.A.B Port: φ26×2.4
O-ring for X.Y.L Port: φ15×1.9

DWMG22 Subplate Installation Dimensions

Valve’s set screw
6 of M12×60 GB/T70.1-2000-12.9 Tightening torque Ma=130Nm.
O-ring for P.T.A.B Port: φ31×3.1
O-ring for X.Y Port: φ25×3.1

DWMG25 Subplate Installation Dimensions

Valve’s set screw
6 of M12×60 GB/T70.1-12.9 Tightening torque Ma=130Nm.
O-ring for P.T.A.B Port: φ34×3.1
O-ring for X.Y Port: φ25×3.1

DWMG32 Subplate Installation Dimensions

Valve’s set screw
6 of M20×80 GB/T70.1-2000-12.9 Tightening torque Ma=430Nm.
O-ring for P.T.A.B Port: φ42×3
O-ring for X.Y Port: φ18.5×3.1